SODIUM HYDRIDE DISPERSION

SODIUM HYDRIDE DISPERSION - Names and Identifiers

Name	Sodium hydride
Synonyms	340F NAH 80 0.84-0.86 SodiumHydride Sodium hydride SODIUM HYDRIDE SODIUM HYDRIDE IN OIL Sodium Hydride in oil SODIUM HYDRIDE DISPERSION Sodium hydride inoil gray powder Sodium hydride dispersionin mineral oil
CAS	7646-69-7
EINECS	231-587-3
InChI	InChI=1/Na.H/rHNa/h1H

SODIUM HYDRIDE DISPERSION - Physico-chemical Properties

Molecular Formula	HNa
Molar Mass	24
Density	1.2
Melting Point	800 °C (dec.) (lit.)
Flash Point	185°C
Water Solubility	REACTS
Solubility	Soluble in molten sodium. Insoluble in ammonia, benzene,carbon tetrachloride, carbon disulfide and all organic solvents.
Appearance	powder (moistened with oil)
Color	White to pale gray
Exposure Limit	ACGIH: TWA 5 mg/m3OSHA: TWA 5 mg/m3NIOSH: IDLH 2500 mg/m3; TWA 5 mg/m3; STEL 10 mg/m3
Merck	14,8625
Storage Condition	Store below +30°C.
Sensitive	Air & Moisture Sensitive
Physical and Chemical Properties	Density 1.2 melting point 800°C (dec.) water-soluble reactions
Use	It is an important reducing agent in pharmaceuticals, spices and dyes, and can also be used as a desiccant, alkylating agent, etc.

SODIUM HYDRIDE DISPERSION - Risk and Safety

Risk Codes	R15 - Contact with water liberates extremely flammable gases R36 - Irritating to the eyes R35 - Causes severe burns R11 - Highly Flammable
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S43 - In case of fire use ... (there follows the type of fire-fighting equipment to be used.) S7/8 - S43A - S24/25 - Avoid contact with skin and eyes. S7 - Keep container tightly closed. S60 - This material and its container must be disposed of as hazardous waste. S22 - Do not breathe dust. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S37/39 - Wear suitable gloves and eye/face protection S16 - Keep away from sources of ignition.
UN IDs	UN 1427 4.3/PG 1
WGK Germany	3
RTECS	WB3910000
FLUKA BRAND F CODES	10-21
TSCA	Yes
HS Code	28500090
Hazard Class	4.3
Packing Group	I

SODIUM HYDRIDE DISPERSION - Upstream Downstream Industry

Raw Materials	Methyl alcohol Sodium Orthoboric acid Hydrogen
Downstream Products	Cartap Cedryl Methyl Ether

SODIUM HYDRIDE DISPERSION - Reference Information

NIST chemical information	information provided by: webbook.nist.gov (external link)
EPA chemical substance information	information provided by: ofmpeb.epa.gov (external link)
Introduction	sodium hydride (sodium hydrogen for short) belongs to ionic crystals, salt-like compounds, in which hydrogen is a negative monovalent ion. When heated unstable, not to be melted or decomposed, sodium hydride and water hydrolysis reaction to generate sodium hydroxide and release hydrogen.
properties	pure sodium hydride is silver needle-like crystals, and the products of sodium hydride on the market are generally fine crystalline gray powder, dispersed in oil at a ratio of 25% to 50%. The relative density was 0.92. Sodium hydride crystal is a rock salt type structure (lattice constant a = 0.488nm), and like lithium hydride, hydrogen exists as an anion in the ionic crystal. The heat of formation is 69.5kJ · mol-1, which is decomposed into metallic sodium and hydrogen at 800 ℃. Sodium hydride can react vigorously with water and lower alcohols, causing combustion or explosion. Automatic ignition in moist air. Soluble in molten sodium hydroxide, insoluble in liquid ammonia, benzene, carbon disulfide, carbon tetrachloride. At moderate temperatures, sodium hydride reacts with liquid ammonia to form sodium amino acid.
preparation	Although sodium hydride can be prepared by reacting hydrogen directly with sodium metal at high temperature, however, in the industry, the sodium hydride is prepared by using a mineral oil such as kerosene, adding a dispersant such as anthracene, suspending the sodium metal therein, and reacting with high-pressure hydrogen gas. The product is washed with hexane, dried in a stream of nitrogen, stored sealed in an inert gas, or treated intact in paraffin oil.
quenching method	sodium hydride is generally 60% (stored in oil), if you need to remove oil, you can wash with n-hexane, then pour out the n-hexane (be sure to avoid drying out). In general, it is not necessary to wash too many times, unless the oil affects the reaction (e. G., the system is too viscous, and the oil is combined with the generation of bubbles, and the material is easy to be washed. The post-treatment is that if the amount is not large, it can be directly quenched with water. If the amount is large, the water is slowly dropped. This was suspended in dry tetrahydrofuran and ethanol or isopropanol was added slowly with stirring until no more hydrogen was evolved and the mixture was clear.
Related chemical reaction	sodium hydride is a strong reducing agent, such as titanium tetrachloride can be reduced to metal titanium at 400 ℃: tiCl4 = = 4NaH Ti 4NaCl 2H2. decomposition occurs when heated to 425 °c under normal pressure. And the generation of hydrogen gas. With water can produce a strong reaction, and even a fire, and the formation of sodium hydroxide and the release of hydrogen. Reaction with liquid ammonia to form an amine salt (sodium amino acid) and evolution of hydrogen gas. NaH NH3 --(H2)→ NaNH2 H2. sodium hydride also reacts with halogens, sulfur vapors, sulfur dioxide and carbon dioxide at elevated temperatures. The reduction is very strong, and the metal can be released from the metal oxide and chloride. TiCl4 4NaH → Ti NaCl 2H2. diborane can be formed by the reaction of sodium hydride with boron trifluoride. 2BF3 6NaH → B2H6 6NaF. sodium hydride is stable below 230 ° C. In dry air, above which it burns into sodium oxide. If trace amounts of sodium are present, fires are likely to occur even at low temperatures. In case of fire, water and organic fire extinguishing agents must not be used.
Application	sodium hydride (sodium hydrogen) is mainly used as a reducing agent for metal chloride, a reducing agent for organic synthesis, a hydrogenation agent, the condensing agent, when used as a reducing agent, is mostly suspended in an oil, preferably rinsed with a large amount of water when touched on the skin. sodium hydride (sodium hydrogen) can be used in condensation and alkylation reactions. And can be used for the polymerization catalyst manufacturing pharmaceutical synthesis and perfume industry, manufacturing borohydride, metal surface rust remover, reducing agent, condensing agent, drying agent and the reaction reagent of the Clesson. used as condensing agent, alkylating agent and reducing agent, etc. It is an important reducing agent in pharmacy, perfume and dye, and can also be used as drying agent, alkylating agent
Application	sodium hydride (sodium hydrogen) can be used in condensation and alkylation reactions, and can be used for the polymerization catalyst manufacturing pharmaceutical synthesis and perfume industry, manufacturing borohydride, metal surface rust remover, reducing agent, condensing agent, drying agent and the reaction reagent of the Clesson.
category	water burning articles
explosive hazard characteristics	explosion of hydrogen emitted by water and moist air
flammability hazard characteristics	when water or moist air emits hydrogen
storage and transportation characteristics	The warehouse is ventilated and dried at low temperature; It is stored separately from oxidant, halogen and strong acid
extinguishing agent	dry powder, dry sand, dry powder
toxic substance data	information provided by: pubchem.ncbi.nlm.nih.gov (external link)

Last Update：2024-04-09 20:49:11

Saian Chemical (Shanghai) Co.,Ltd

Featured Products

Product Name: sodium hydride Request for quotation
CAS: 7646-69-7
Tel: +86 0316-2098956
Email: lily.qi@saianchem.com
Mobile: 18231631255
QQ: 1574535170

Send QQ message

CHEMBSF (Shanghai) Biomedical Technology Co., Ltd

Spot supply

Product Name: Sodium hydride Request for quotation
CAS: 7646-69-7
Tel: +86-18721521379
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379

JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.

Spot supply

Product Name: Sodium hydride Request for quotation
CAS: 7646-69-7
Tel: +86-17505207175
Email: r@reformchem.com
Mobile: +86-17505207175
QQ: 3787852685

Send QQ message
Wechat: chemical6666

Nantong Reform Petro-Chemical CO., LTD.

Spot supply

Product Name: Sodium hydride Request for quotation
CAS: 7646-69-7
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865

Send QQ message
Wechat: chemical6666

Changsha Changtang import and Export Co., Ltd.

Product Name: Sodium hydride Request for quotation
CAS: 7646-69-7
Tel: +86 18942506900
Email: 492657010@qq.com
Mobile: +86 18942506900
QQ: 492657010

Wechat: +86 18942506900
WhatsApp: +86 18942506900
Linkedin: +86 18942506900

SKYRUN INDUSTRIAL CO.,LTD

Spot supply

Product Name: Sodium hydride Visit Supplier Webpage Request for quotation
CAS: 7646-69-7
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185

Send QQ message
Wechat: chinaskyrun

SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.

Spot supply

Product Name: Sodium hydride Visit Supplier Webpage Request for quotation
CAS: 7646-69-7
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922

Wechat: 18621343501
WhatsApp: +86-18621343501

Hefei TNJ Chemical Industry Co.,Ltd.

Product Name: Sodium hydride Request for quotation
CAS: 7646-69-7
Tel: 0086-551-65418684
Email: sales@tnjchem.com
　　　　 info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840

Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog

View History

SODIUM HYDRIDE DISPERSION
2-[(乙氧基羰基)氨基]-3-氧代丁酸乙酯
磷酸异辛酯(2-乙基己极磷酸酯,单酯和二酯共混物)
4-氨基苯甲酸叔-丁基酯
2.6-二甲氧基苯腈
Methanone, 4-morpholinyl[4-(2-pyrrolidinylmethoxy)phenyl]-
L-苯甘氨酸甲酯
LABOTEST-BB LT00159735
6-溴-3-甲氧基吡嗪-2-羧酸甲酯
TRIETHYLENE GLYCOL TOSYLATE

Raw Materials for SODIUM HYDRIDE DISPERSION

Methyl alcohol
Sodium
Orthoboric acid
Hydrogen

Downstream Products for SODIUM HYDRIDE DISPERSION

Cartap
Cedryl Methyl Ether

SODIUM HYDRIDE DISPERSION

Sodium hydride

CAS: 7646-69-7

Molecular Formula: HNa

SODIUM HYDRIDE DISPERSION - Names and Identifiers

SODIUM HYDRIDE DISPERSION - Physico-chemical Properties

SODIUM HYDRIDE DISPERSION - Risk and Safety

SODIUM HYDRIDE DISPERSION - Upstream Downstream Industry

SODIUM HYDRIDE DISPERSION - Reference Information

Supplier List

SODIUM HYDRIDE DISPERSION Request for Quotation

Sodium hydride

CAS: 7646-69-7

Molecular Formula: HNa

SODIUM HYDRIDE DISPERSION - Names and Identifiers

SODIUM HYDRIDE DISPERSION - Physico-chemical Properties

SODIUM HYDRIDE DISPERSION - Risk and Safety

SODIUM HYDRIDE DISPERSION - Upstream Downstream Industry

SODIUM HYDRIDE DISPERSION - Reference Information

Supplier List

SODIUM HYDRIDE DISPERSION